‹ Back
Deploy360 17 October 2013

Video/Slides: Case Study – IPv6 and Home Automation (RIPE67)

Dan York
By Dan YorkDirector, Online Content

How well can a home be automated using IPv6? This week at RIPE67, Nathalie Trenaman spoke about how she and her boyfriend have been in the process of wiring up their home to work over IPv6. We previously mentioned the IPv6 home automation blog she’s been maintaining, but in this presentation she went into a great amount of detail and provided a good set of slides outlining the steps they’ve gone through and what has or hasn’t worked. You can watch the video on the RIPE67 site:

RIPE 67 - Nathalie Trenaman

Natalie concludes offering these “lessons learned”:

  • IPv6 in your house is not cheap
  • There is a lot of manual labour involved
  • Thank Goodness for Open Source!
  • Vendors of commercial “home” products are not even aware of IPv6
  • Not everything with IPv4 can be done with IPv6

It’s a good set of information and it is through efforts like this that we’ll start to see consumer electronics vendors paying attention.

Have you tried automating your home over IPv6? What has your experience been? What systems have you found that work over IPv6?

‹ Back

Disclaimer: Viewpoints expressed in this post are those of the author and may or may not reflect official Internet Society positions.

Related articles

Improving Technical Security 15 March 2019

DNS Privacy Frequently Asked Questions (FAQ)

We previously posted about how the DNS does not inherently employ any mechanisms to provide confidentiality for DNS transactions,...

Improving Technical Security 14 March 2019

Introduction to DNS Privacy

Almost every time we use an Internet application, it starts with a DNS (Domain Name System) transaction to map...

Improving Technical Security 13 March 2019

IPv6 Security for IPv4 Engineers

It is often argued that IPv4 practices should be forgotten when deploying IPv6, as after all IPv6 is a...

Join the conversation with Internet Society members around the world